Availability: | |
---|---|
Equestrian arena lighting refers to the lighting facilities provided in equestrian are for equestrian competitions or other equestrian activities. Good lighting design is important for equestrian competitions and training events as it ensures that participants and spectators can clearly see the arena and competitors' performance in any weather condition.
In equestrian arena lighting, professional lighting systems are often used, and these systems are designed to provide even, bright light to ensure there are no shadows or blind spots during competition. Additionally, lighting systems need to take into account the horse’s sensitivities to avoid overly bright or harsh lights that may cause discomfort to the horse.
Equestrian arena lighting usually needs to meet competition rules and safety standards to ensure that the competition venue can provide sufficient light under various conditions so that participants and spectators can enjoy equestrian activities safely and comfortably.
OAK LED have been manufacturing riding arena lights and providing DIAlux lighting simulation with over 12 years for indoor and outdoor riding arena.
● Original CREE/Bridgelux COB LED Chips from USA, Meanwell or Inventronics power supply adapted.
● High flux efficiency, real 170lm/w, 100~305Vac or 277~480Vac input.
● TIR PC optical lens, optional beam angle 15°, 25°, 45°, 60°, 90°, 120° for outdoor/indoor horse arena.
● Maximum ground lighting efficiency, 2-5 times brighter than conventional lighting fixutres.
● Best glare control system of roping arena lights.
● High tech thermal management system, groove fins design, 30% higher heat dissipation efficiency.
● 100,000 hours lifetime still have 50% brightness, low maintenance cost.
● IP67 Waterproof, 5 years warranty.
Horse Arena lighting by using 8pcs 200w outdoor led horese arena lights.
MN | Power | Size | Efficiency | Beam Angle | Color | Dimming |
OAK-FL-100W-Smart | 100 | 318x255x70 | 170lm/w | 15, 25, 40, | 2700-6500K | PWM |
OAK-FL-150W-Smart | 150 | 318x320x70 | ||||
OAK-FL-200W-Smart | 200 | 418x320x70 | ||||
OAK-FL-300W-Smart | 300 | 468x436x70 | ||||
OAK-FL-400W-Smart | 400 | 568x436x70 | ||||
OAK-FL-500W-Smart | 500 | 568x501x70 | ||||
OAK-FL-600W-Smart | 600 | 568x566x70 | ||||
OAK-FL-720W-Smart | 720 | 668x566x70 | ||||
OAK-FL-800W-Smart | 800 | 668x631x70 | ||||
OAK-FL-1000W-Smart | 1000 | 718x696x70 |
Designing and building indoor and outdoor horse arena lighting requires careful consideration of factors such as arena size, layout, horse and rider visibility, energy efficiency, and local regulations.
Equestrian arena lighting refers to the lighting facilities provided in equestrian are for equestrian competitions or other equestrian activities. Good lighting design is important for equestrian competitions and training events as it ensures that participants and spectators can clearly see the arena and competitors' performance in any weather condition.
In equestrian arena lighting, professional lighting systems are often used, and these systems are designed to provide even, bright light to ensure there are no shadows or blind spots during competition. Additionally, lighting systems need to take into account the horse’s sensitivities to avoid overly bright or harsh lights that may cause discomfort to the horse.
Equestrian arena lighting usually needs to meet competition rules and safety standards to ensure that the competition venue can provide sufficient light under various conditions so that participants and spectators can enjoy equestrian activities safely and comfortably.
OAK LED have been manufacturing riding arena lights and providing DIAlux lighting simulation with over 12 years for indoor and outdoor riding arena.
● Original CREE/Bridgelux COB LED Chips from USA, Meanwell or Inventronics power supply adapted.
● High flux efficiency, real 170lm/w, 100~305Vac or 277~480Vac input.
● TIR PC optical lens, optional beam angle 15°, 25°, 45°, 60°, 90°, 120° for outdoor/indoor horse arena.
● Maximum ground lighting efficiency, 2-5 times brighter than conventional lighting fixutres.
● Best glare control system of roping arena lights.
● High tech thermal management system, groove fins design, 30% higher heat dissipation efficiency.
● 100,000 hours lifetime still have 50% brightness, low maintenance cost.
● IP67 Waterproof, 5 years warranty.
Horse Arena lighting by using 8pcs 200w outdoor led horese arena lights.
MN | Power | Size | Efficiency | Beam Angle | Color | Dimming |
OAK-FL-100W-Smart | 100 | 318x255x70 | 170lm/w | 15, 25, 40, | 2700-6500K | PWM |
OAK-FL-150W-Smart | 150 | 318x320x70 | ||||
OAK-FL-200W-Smart | 200 | 418x320x70 | ||||
OAK-FL-300W-Smart | 300 | 468x436x70 | ||||
OAK-FL-400W-Smart | 400 | 568x436x70 | ||||
OAK-FL-500W-Smart | 500 | 568x501x70 | ||||
OAK-FL-600W-Smart | 600 | 568x566x70 | ||||
OAK-FL-720W-Smart | 720 | 668x566x70 | ||||
OAK-FL-800W-Smart | 800 | 668x631x70 | ||||
OAK-FL-1000W-Smart | 1000 | 718x696x70 |
Designing and building indoor and outdoor horse arena lighting requires careful consideration of factors such as arena size, layout, horse and rider visibility, energy efficiency, and local regulations.
OAK LED provide some suggestions on how to make equestrian arena lighting and how to choose roping arena lights as below:
Lighting Fixtures:
Choose outdoor led horse arena lights designed with waterproof, best glare control system, anti-fade and resistant to weather conditions.
Placement:
Install riding arena lights around the perimeter of arena to minimize shadows and ensure even illumination.
Our led light has optional beam angle of 15/25/40/60/90/120 degree, aim for consistent lighting throughout whole arena to improve visibility.
Pole Height and Spacing:
Select pole heights that provide adequate coverage without creating glare for riders or horses.
Ensure appropriate spacing between poles for uniform lighting distribution.
Lighting Levels:
Average illuminance level of around 50-75FC for general riding and up to 150FC for competition events.
Motion Sensors/Dimming System:
Consider to add motion sensors or dimming system to save energy by turning off lights when the arena is not in use.
Regulatory Compliance:
Check local regulations and zoning requirements regarding outdoor lighting to ensure compliance.
Lighting Fixtures:
Choose led fixtures designed for indoor horse arena lighting with appropriate lumen output, energy efficiency and low maintenance, likes LED highbay lights, flood lights or panel lights.
Layout and Coverage:
Install roping arena lights averagely across the ceiling with suitable beam angle according to height to provide high illumination uniformity. Using a combination of direct and indirect lighting to minimize shadows.
Lighting Levels:
Average illuminance level of around 50-75FC for general riding and up to 150FC for competitions.
Emergency Lighting:
If needed please install emergency lighting to ensure visibility in case of power outages.
Light Control:
Implement lighting control systems to adjust intensity and create different lighting scenarios based on the activities.
Regulatory Compliance:
Comply to local building codes and regulations related to indoor equestrian arena lighting.
Professional Consultation:
We, OAK LED have lighting designer and engineers team experienced in indoor and ourdoor horese arena lighting who can provide tailored solutions based on your specific needs, ensuring the safety and well-being of both horses and riders.
OAK LED provide some suggestions on how to make equestrian arena lighting and how to choose roping arena lights as below:
Lighting Fixtures:
Choose outdoor led horse arena lights designed with waterproof, best glare control system, anti-fade and resistant to weather conditions.
Placement:
Install riding arena lights around the perimeter of arena to minimize shadows and ensure even illumination.
Our led light has optional beam angle of 15/25/40/60/90/120 degree, aim for consistent lighting throughout whole arena to improve visibility.
Pole Height and Spacing:
Select pole heights that provide adequate coverage without creating glare for riders or horses.
Ensure appropriate spacing between poles for uniform lighting distribution.
Lighting Levels:
Average illuminance level of around 50-75FC for general riding and up to 150FC for competition events.
Motion Sensors/Dimming System:
Consider to add motion sensors or dimming system to save energy by turning off lights when the arena is not in use.
Regulatory Compliance:
Check local regulations and zoning requirements regarding outdoor lighting to ensure compliance.
Lighting Fixtures:
Choose led fixtures designed for indoor horse arena lighting with appropriate lumen output, energy efficiency and low maintenance, likes LED highbay lights, flood lights or panel lights.
Layout and Coverage:
Install roping arena lights averagely across the ceiling with suitable beam angle according to height to provide high illumination uniformity. Using a combination of direct and indirect lighting to minimize shadows.
Lighting Levels:
Average illuminance level of around 50-75FC for general riding and up to 150FC for competitions.
Emergency Lighting:
If needed please install emergency lighting to ensure visibility in case of power outages.
Light Control:
Implement lighting control systems to adjust intensity and create different lighting scenarios based on the activities.
Regulatory Compliance:
Comply to local building codes and regulations related to indoor equestrian arena lighting.
Professional Consultation:
We, OAK LED have lighting designer and engineers team experienced in indoor and ourdoor horese arena lighting who can provide tailored solutions based on your specific needs, ensuring the safety and well-being of both horses and riders.